-
Keep all
pertinent information a minimum of 2mm from all trim and perforated lines.
-
We don't
recommend using type smaller than 8 points when reversing out of a color
field.
-
Extend
artwork at least 4mm beyond trim lines for bleeds.
-
Artwork
must be submitted as 150 lpi Composite Negative Films, Emulsion Down, Right
Reading.
-
Artwork
NOT submitted to specifications will incur an additional charge to get
the artwork into that form. The customer will be informed of that additional
charge after the artwork is evaluated but before the project begins.
-
A Color key
or Match print must accompany composite negatives (not necessary for B/W
art).
-
Cut lines,
score lines, and registration marks must appear on all film layers.
-
All folder
panels of a particular side must appear together as they are expected to
be printed. Booklet page film must appear as a 2-page printer spread-for
example: pages 2 and 7 (of an 8-page booklet) would appear together will
score marks dividing them.
-
If tray cards
are supplied pre-printed, the spines must be perforated. If booklets are
supplied, staples on the booklet must be placed accurately on the fold
and cannot protrude above or below that fold.
-
Booklets
cannot exceed 1.8mm thick.
-
Paper
stock is coated on both sides.
-
Always remember that there will be an
additional charge for overrun of at least 10%.
 |
 |
REMEMBER:
Failure to follow guidelines will undoubtedly result in production delays
and additional costs!
